![logo [Bucks County Technical High School]]([{%22url%22:%22https://resources.finalsite.net/images/f_auto,q_auto,t_image_size_1/v1753293976/bcthscom/ikz4uh7nzwp8mqiv4dhi/bcths-parent-logo-primary-fullcolor-onwhite.png%22,%22width%22:256},{%22url%22:%22https://resources.finalsite.net/images/f_auto,q_auto,t_image_size_2/v1753293976/bcthscom/ikz4uh7nzwp8mqiv4dhi/bcths-parent-logo-primary-fullcolor-onwhite.png%22,%22width%22:512},{%22url%22:%22https://resources.finalsite.net/images/f_auto,q_auto,t_image_size_3/v1753293976/bcthscom/ikz4uh7nzwp8mqiv4dhi/bcths-parent-logo-primary-fullcolor-onwhite.png%22,%22width%22:800},{%22url%22:%22https://resources.finalsite.net/images/f_auto,q_auto,t_image_size_4/v1753293976/bcthscom/ikz4uh7nzwp8mqiv4dhi/bcths-parent-logo-primary-fullcolor-onwhite.png%22,%22width%22:1200},{%22url%22:%22https://resources.finalsite.net/images/f_auto,q_auto/v1753293976/bcthscom/ikz4uh7nzwp8mqiv4dhi/bcths-parent-logo-primary-fullcolor-onwhite.png%22,%22width%22:1500}])
Fine Woodworking(CIP: 48.0703 )
About
Program Overview
Students learn the necessary skills for drawing, designing, cutting, assembling, and finishing a woodworking project. Through a series of assigned woodworking projects, students learn to draw/read blueprints by hand and through our computerized drafting software, operate various tools & machinery, apply the finish in our spray booth, and install finished projects. Students will have the opportunity to be trained on all of our NEW state-of-the-art machinery including our CNC Laser, CNC Router, UpCut Cutoff Saw, Straight Line Rip Saw, SawStop Table Saws, Festool Miter Saws, Surface Planer, Jointers, Lathes, Shapers, Bandsaw, Scroll Saws, Panel Saw, Pocket-Hole Machine, Drill Press, Wide Belt Sander, Multi-Router, Spray booth, and many more!
Fine Woodworking focuses on creating all the interior woodwork that you find on the inside of your home, from the hardwood floors & trim, to kitchen cabinets & furniture throughout. Kitchens & bathrooms are the most expensive rooms within a home, and that is what we specialize in! Students will have the ability to work on live projects from around the school, or complete project requests from community members, such as the construction of kitchen cabinets as pictured below, allowing the students to gain valuable real-world experience throughout the program. Experienced Juniors & Seniors will also have the ability to design and build a woodworking project of their choosing. Junior & Senior students will have the opportunity to participate in the Cooperative Education Program where they will receive on-site training at one of the many finish carpentry businesses around Bucks County, allowing them to earn wages and further their skills while still being a student. Upon graduation, this program will well-equip students to gain skillful employment in all finish carpentry/woodworking industries, attend college, or join our armed forces. Through the use of learning guides, lectures, demonstrations, internships, co-op, and the above projects, we feel we can best prepare our students for careers in any of the woodworking & finish carpentry fields.
Work Based Learning
It is a privilege for students to partake in the School-to-Career Program. Students are not required to participate; therefore, they can be removed at any time. Due to strenuous liability and accountability issues, under no uncertain terms can this privilege be abused. These experiences are an integral part of the school’s curriculum, and participation will reflect directly on the student’s academic standing. Typically, students must receive a “C” or better and have a good attendance and discipline record. Please see the School to Career Office for more information on a variety of work-based experiences for students, including Cooperative Education, Internships, Job Placements, and School-to-Career transition programs.
Junior (4th marking-period) and Senior students are eligible to participate in the School-to-Career program after completing a pre-evaluation form.
Additional Requirements (Seniors) – Seniors must complete a minimum of 75% of their task list, maintain a C Final Average in all classes, have zero discipline referrals for Senior year, and less than 10 combined Unexcused Absences and Tardies.
Additional Requirements (Juniors)- Juniors must complete a minimum of 60% of their task list, maintain a C Final Average in all classes, have zero discipline referrals for Junior year, and less than 10 combined Unexcused Absences and Tardies.
Technical Program Participation During Work-Based Learning- Students are required to check in with their Technical Instructor during the academic rotation and sign in. All students are required to be in for the NOCTI Exam and pre-determined NOCTI Prep days, (Additional options: Half day co-op for senior students, come to school in the morning, leave at 10:15am for work).
Grading Procedures for Work-Based Learning: Students will be graded by averaging the Employer Evaluation and required classwork.Articulations Agreements
Bucks County Community College- Fine Arts Woodworking and Furniture and Cabinetmaking
Entrance Recommendations
- Eye/hand/foot coordination
- Finger dexterity
- Manual dexterity
- Spatial acuity
- Forms perception
- Arm-hand steadiness
Career Pathways
- Entry Level (Program Completion and Industry Credentials)
- Cabinetmaker
- Millwork Technician
- Woodworking Machine Operator
- Technical Careers (Apprenticeships, Associate Degree, Advanced Certification, Experience)
- CNC Woodworking Technician
- Furniture Maker
- Finish Carpenter
- Professional Careers (Bachelor’s, Master’s, Specialized Training, Experience)
- Industrial Designer (Furniture & Cabinetry)
- Manufacturing Engineer (Wood Products)
- Architectural Woodwork Specialist
Industry Certifications
Students in the Woodworking program have the opportunity to earn the following certifications.
- CareerSafe OSHA10 - General Industry
- S/P2 Safety Construction Training Certification
- CareerSafe OSHA10 - Construction
- NOCTI Competent & Advanced Certificates
- AWI (Architectural Woodwork Institute)
- American Ladder Institute (Step Ladder, Extension Ladder, Articulated Ladder, Mobile Ladder)
Class Resources
Shop Highlight Video
Instructor
Program Requirements
Equipment, Materials, Uniform, Other Requirements
- Students must always be prepared with their shop uniform shirts every day.
- Students may, and are encouraged to, purchase more than two shirts from the store if available.
- Hooded sweatshirts will also be available for sale in the store but are not required.
- Students are required to purchase shop uniform shirts from the school store, one short-sleeved & one long-sleeved ARE REQUIRED (Mr. Ribarchik will instruct on color).
- Carpenter pants or jeans are recommended.
- During the hot days at the beginning of the school year and near the end of the school year, shorts may be worn if they’re jean or khaki type shorts or cargo shorts.
- No gym shorts, no sweat pants, no pajama pants, etc.; Industry appropriate attire only.
- No jewelry of any kind is to be worn.
- No loose-fitting clothing will be permitted at any time.
- Long hair MUST be tied back.
- Boots – (Students are required to purchase this required footwear, absolutely NO open-toed shoes: i.e. flip flops, sandals, etc.)
Equipment, Materials, Uniform, Other Requirements
- PENCIL - Students must come prepared with a #2 pen every day, no "clicky" pens.
- SAFETY GLASSES - Students have issued a pair of glasses from the school nurse at the beginning of the year. "Regular" or "Over the glasses" type of safety glasses are available. If they are lost, stolen, broken, students are to pay for a replacement pair in the Main Office. Students may also purchase their own from a local store, and they need to be clear lenses, no tinted lenses.
- TAPE MEASURE - Students are required to purchase their tape measure. The recommended tape measure for Fine Woodworking is a Stanley PowerLock 16 Ft. tape measure.
- (2), 1-1/2" - 3-RING, VIEW STYLE BINDER - Students are required to purchase two, 3-Ring Binders for their portfolio & notebook in this class. Students need a 1-1/2", Color: Black, View Style, 3 Ring Binder.
- LAB WORKBOOK - Students are required to purchase the "Modern Cabinetmaking - Fifth Edition, Lab Workbook". A one-time purchase at the start of their 10th-grade school year to the main office, students must bring their receipt to Mr. Ribarchik after purchase is made.
- OSHA 10 CERTIFICATION - 10th grade students are required to purchase the CareerSafe OSHA 10 General Industry Certification course, a one-time purchase at the start of their 10th-grade school year. Students must bring their receipt to Mr. Ribarchik after purchase is made.
Textbooks and Learning Management Systems
Textbooks or assignments may be accessed through Google classroom and delivered by the instructor. Student grading will be completed in Skyward and Program Task Tracking will be completed in CTE360. The textbooks & resources used in this program are:
- Modern Cabinetmaking - 6th Edition, Patrick Molzahn, William Umstattd, Charles Davis
- Modern Cabinetmaking Workbook - 6th Edition, Brian Skates, Nancy Henke-Konopasek
- VCarve Pro CADD Software
- Velocity CNC Router Software
- CorelDRAW CADD Software
- One Touch Laser Photo CADD Software
- Universal Laser Systems Control CNC Software
- Cricut CADD Software